History

Luca 90097d422d docs(electrical/temperature-sensor): add README.md with panelization command		2024-01-05 18:42:54 +01:00
..
gerber	chore(electrical/temperature-sensor-2x2): apply paste only for one resistor per board	2024-01-04 17:03:27 +01:00
README.md	docs(electrical/temperature-sensor): add README.md with panelization command	2024-01-05 18:42:54 +01:00
fp-lib-table	feat(electrical): add temperature sensor pcb	2024-01-04 16:05:12 +01:00
temperature-sensor-2x2.kicad_dru	feat(electrical): add 2x2 temperature sensor panel	2024-01-04 16:32:57 +01:00
temperature-sensor-2x2.kicad_pcb	chore(electrical/temperature-sensor-2x2): apply paste only for one resistor per board	2024-01-04 17:03:27 +01:00
temperature-sensor-2x2.kicad_pro	chore(electrical/temperature-sensor-2x2): apply paste only for one resistor per board	2024-01-04 17:03:27 +01:00
temperature-sensor.kicad_pcb	feat(electrical): add temperature sensor pcb	2024-01-04 16:05:12 +01:00
temperature-sensor.kicad_pro	feat(electrical): add temperature sensor pcb	2024-01-04 16:05:12 +01:00
temperature-sensor.kicad_sch	chore(electrical/temperature-sensor): assign LCSC part numbers	2024-01-04 16:50:32 +01:00

README.md

TMP116/7 temperature sensor

2x2 panel

Generate using KiKit:

kikit panelize --layout 'grid; rows: 2; cols: 2; space: 2mm' --tabs 'fixed; hcount: 0' --cuts 'mousebites; drill: 0.5mm; spacing: 1mm; offset: -0.2mm; prolong: 2mm' --framing 'railstb; width: 5mm; space: 3mm' --text 'simple; text: JLCJLCJLCJLC; anchor: mt; voffset: 2.5mm; hjustify: center; vjustify: center' --post 'millradius: 1mm' temperature-sensor.kicad_pcb temperature-sensor-2x2.kicad_pcb

Afterwards, manually remove the pads of 3 of the 4 resistors per single board from the paste layer.