Files aktualiesiert

git-svn-id: svn://svn.cccv.de/engel-system@231 29ba0400-6e00-0410-a75a-ca02368028f8

default-conf/asterisk/extensions.conf

@@ -1,3 +1,160 @@
-[Engelsystem]
-exten => s,1,Playback(demo-abouttotry);
+;
+; Static extension configuration file, used by
+; the pbx_config module. This is where you configure all your 
+; inbound and outbound calls in Asterisk. 
+; 
+; This configuration file is reloaded 
+; - With the "extensions reload" command in the CLI
+; - With the "reload" command (that reloads everything) in the CLI
+
+;
+; The "General" category is for certain variables.  
+;
+[general]
+;
+; If static is set to no, or omitted, then the pbx_config will rewrite
+; this file when extensions are modified.  Remember that all comments
+; made in the file will be lost when that happens. 
+;
+; XXX Not yet implemented XXX
+;
+static=yes
+;
+; if static=yes and writeprotect=no, you can save dialplan by
+; CLI command 'save dialplan' too
+;
+writeprotect=no
+;
+; If autofallthrough is set, then if an extension runs out of
+; things to do, it will terminate the call with BUSY, CONGESTION
+; or HANGUP depending on Asterisk's best guess (strongly recommended).
+;
+; If autofallthrough is not set, then if an extension runs out of 
+; things to do, asterisk will wait for a new extension to be dialed 
+; (this is the original behavior of Asterisk 1.0 and earlier).
+;
+autofallthrough=yes
+;
+; If clearglobalvars is set, global variables will be cleared 
+; and reparsed on an extensions reload, or Asterisk reload.
+;
+; If clearglobalvars is not set, then global variables will persist
+; through reloads, and even if deleted from the extensions.conf or
+; one of its included files, will remain set to the previous value.
+;
+clearglobalvars=no
+;
+; If priorityjumping is set to 'yes', then applications that support
+; 'jumping' to a different priority based on the result of their operations
+; will do so (this is backwards compatible behavior with pre-1.2 releases
+; of Asterisk). Individual applications can also be requested to do this
+; by passing a 'j' option in their arguments.
+;
+priorityjumping=no
+;
+; You can include other config files, use the #include command
+; (without the ';'). Note that this is different from the "include" command
+; that includes contexts within other contexts. The #include command works
+; in all asterisk configuration files.
+;#include "filename.conf"
+
+; The "Globals" category contains global variables that can be referenced
+; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental
+; variables,
+; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid
+;
+[globals]
+CONSOLE=Console/dsp				; Console interface for demo
+;CONSOLE=Zap/1
+;CONSOLE=Phone/phone0
+IAXINFO=guest					; IAXtel username/password
+;IAXINFO=myuser:mypass
+TRUNK=Zap/g2					; Trunk interface
+;
+; Note the 'g2' in the TRUNK variable above. It specifies which group (defined
+; in zapata.conf) to dial, i.e. group 2, and how to choose a channel to use in
+; the specified group. The four possible options are:
+;
+; g: select the lowest-numbered non-busy Zap channel
+;    (aka. ascending sequential hunt group).
+; G: select the highest-numbered non-busy Zap channel
+;    (aka. descending sequential hunt group).
+; r: use a round-robin search, starting at the next highest channel than last
+;    time (aka. ascending rotary hunt group).
+; R: use a round-robin search, starting at the next lowest channel than last
+;    time (aka. descending rotary hunt group).
+;
+TRUNKMSD=1					; MSD digits to strip (usually 1 or 0)
+;TRUNK=IAX2/user:pass@provider
+
+;
+; Any category other than "General" and "Globals" represent 
+; extension contexts, which are collections of extensions.  
+;
+; Extension names may be numbers, letters, or combinations
+; thereof. If an extension name is prefixed by a '_'
+; character, it is interpreted as a pattern rather than a
+; literal.  In patterns, some characters have special meanings:
+;
+;   X - any digit from 0-9
+;   Z - any digit from 1-9
+;   N - any digit from 2-9
+;   [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9)
+;   . - wildcard, matches anything remaining (e.g. _9011. matches 
+;	anything starting with 9011 excluding 9011 itself)
+;   ! - wildcard, causes the matching process to complete as soon as
+;       it can unambiguously determine that no other matches are possible
+;
+; For example the extension _NXXXXXX would match normal 7 digit dialings, 
+; while _1NXXNXXXXXX would represent an area code plus phone number
+; preceded by a one.
+;
+; Each step of an extension is ordered by priority, which must
+; always start with 1 to be considered a valid extension.  The priority
+; "next" or "n" means the previous priority plus one, regardless of whether
+; the previous priority was associated with the current extension or not.
+; The priority "same" or "s" means the same as the previously specified
+; priority, again regardless of whether the previous entry was for the
+; same extension.  Priorities may be immediately followed by a plus sign
+; and another integer to add that amount (most useful with 's' or 'n').  
+; Priorities may then also have an alias, or label, in 
+; parenthesis after their name which can be used in goto situations
+;
+; Contexts contain several lines, one for each step of each
+; extension, which can take one of two forms as listed below,
+; with the first form being preferred.  One may include another
+; context in the current one as well, optionally with a
+; date and time.  Included contexts are included in the order
+; they are listed.
+;
+;[context]
+;exten => someexten,priority[+offset][(alias)],application(arg1,arg2,...)
+;exten => someexten,priority[+offset][(alias)],application,arg1|arg2...
+;
+; Timing list for includes is 
+;
+;   <time range>|<days of week>|<days of month>|<months>
+;
+;include => daytime|9:00-17:00|mon-fri|*|*
+;
+; ignorepat can be used to instruct drivers to not cancel dialtone upon
+; receipt of a particular pattern.  The most commonly used example is
+; of course '9' like this:
+;
+;ignorepat => 9
+;
+; so that dialtone remains even after dialing a 9.
+;
+
+[Engelsystem]
+
+[default]
+;exten => s,1,Playback(demo-abouttotry);
+;exten => s,1,Dial(SIP/1023@camp.eventphone.de);
+exten => s,1,Answer;
+exten => s,2,Playback(beep);
+exten => s,3,Festival(${msg});
+exten => s,4,Playback(beep);
+exten => s,5,Festival(${msg});
+exten => s,6,Hangup;
 

default-conf/asterisk/iax.conf

@@ -1,6 +0,0 @@
-[Engelsystem]
-type=user                     ; friend (allow user to make calls and to be called), peer (user can be only called) or user (user can call only).
-auth=md5
-secret=password
-host=<host ip>
-context=Engelsystem

default-conf/etc/crontab

@@ -1 +1 @@
-*/15    * * * * www-data  (cd /var/www.ssl/admin ; php4 dect_cron.php)
+*/15    * * * * www-data  (cd /home/engel-system/services ; php4 cron_dect.php)

default-conf/etc/festival.scm

@@ -0,0 +1,17 @@
+;; Any site-wide Festival initialization can be added to this file.
+;; It is marked as a configuration file, so your changes will be saved
+;; across upgrades of the Festival package.
+;;
+
+
+; Server access list (hosts)
+(set! server_access_list '("[^.]+" "127.0.0.1" "localhost.*"))
+
+;; Command for Asterisk begin
+(define (tts_textasterisk string mode)
+	"(tts_textasterisk STRING MODE)
+	Apply tts to STRING.  This function is specifically designed for
+	use in server mode so a single function call may synthesize the string.
+	This function name may be added to the server safe functions."
+	(utt.send.wave.client (utt.wave.resample (utt.wave.rescale (utt.synth (eval (list 'Utterance 'Text string))) 5) 8000)))
+